1. Please put the product upside and remove the upper cover (FIG. 1).
2. Please connect the AC adaptor to the DC jack on the base (FIG. 2).
3. Using the measuring cup, fill the water tank with tap water up to the max water level line. Do not overfill or mist output may be low. Do not use hot water. Please never fill in water during operation. Drop essential oil into water tank vertically. About 30-45 drops per 250 ml water (FIG. 3).
4. Replace the upper cover onto the base. Attention: You must cover the upper cover when you want to use the product (FIG. 4).
5. Connect the AC adaptor to the power supply socket.
6. Right Side – Power: 1st Press: Timer set for 60 min of continuous mist; 2nd Press: Timer set for 120 min of continuous mist; 3rd Press: Timer set for 180 min of continuous mist; 4th Press: Continuous mist will turn off when water level becomes too low. 5th Press: Turn off the mist. Press mist button for 3 seconds at any time to turn unit off (FIG. 5).
7. Left Side – Light:1st Press: Bright and soft rotating color; 2nd Press: Freeze current color. Continue pressing to scroll through color choices, till the light is off and then recycle. Press and hold light button for 3 seconds at any time to turn light off (FIG. 6).
8. Middle – HIGH/LOW Mist: Toggle button between high mist (one beep will sound) or low mist (two beeps will sound).
9. The unit turns off automatically when water is not detected.